👍[High-performance DSP] Sipeed Tang Primer 20K Core Module board is sodimm package,uses GW2A-LV18PG256C8I7 as the main chip, and hasmultiple internal resources, such as high-performance DSP,high-speed LvDs interface and BSRAM resources, on-boardDDR3 and PMIC. Users could use this CM board for rapiddevelopment and verify, and it’s suitable for high-speedand low-cost situations.
👍[Run RISC-V Code] Users can burn the hardware code bitstream file ofPicoRV/Litex to Gw2A, and then use GW2A as acommon MCU. lt can run RISC-V code, conduct RISC-v soft core experiments
👍[Verilog Design] Users use Verilog to design custom hardware func-tions on the basic of PicoRV/Litex lP core, and at thesame time use C language to write code running onPicoRV/Litex core.
This is a official online store for Sipeed Tang Primer 20K Lite Ext-Board Gowin GW2A FPGA GoAI Core Board Minimum System Single Board Computer Onboard 128MB bits DDR3 RAM 828K B-SRAM Support RGB DVP PMOD DIP products. Get official player products from the official online store of the Sipeed Tang Primer 20K Lite Ext-Board Gowin GW2A FPGA GoAI Core Board Minimum System Single Board Computer Onboard 128MB bits DDR3 RAM 828K B-SRAM Support RGB DVP PMOD DIP. Sipeed Tang Primer 20K Lite Ext-Board Gowin GW2A FPGA GoAI Core Board Minimum System Single Board Computer Onboard 128MB bits DDR3 RAM 828K B-SRAM Support RGB DVP PMOD DIP is available in a wide variety of sizes and colors.
This is an Sipeed Tang Primer 20K Lite Ext-Board Gowin GW2A FPGA GoAI Core Board Minimum System Single Board Computer Onboard 128MB bits DDR3 RAM 828K B-SRAM Support RGB DVP PMOD DIP, with a classic baseball style and a modern, streamlined design. The Sipeed Tang Primer 20K Lite Ext-Board Gowin GW2A FPGA GoAI Core Board Minimum System Single Board Computer Onboard 128MB bits DDR3 RAM 828K B-SRAM Support RGB DVP PMOD DIP product is made from high quality material, and is the perfect way to show off your team pride.
👍[Rich Peripheral interfaces]Sipeed Tang Primer 20K Dock is equipped with a wealth of pe-ripheral resources, such as onboard USB-JTAG & UARTperipheral , Ethernet PHY and RJ45 connector, USB2.0PHY，HDMIl output connector,Audio output circuit and3.5mm connector，RGB screen connector,DVP cameraconnector.
👍[PMOD interfaces] Sipeed Tang Primer 20K Lite ext-board routes so many lOs todouble row pin headers and PMOD interfaces, with whichusers could easily connect other peripheral modules or cir-cuits for secondary development.
👍[Minimalist IDE] Comapred with other FPGA IDE, the lDE which is used to develop Tang Primer 20K is really small, the hard disk capacity occupied after installation does not exceed 1G.
